• Compact Design, Plug and Play
  • Real Time Vehicle Status Monitoring From OBD Port
  • Wide Operating Voltage Range +6.0 ~+45VDC/1.5A
  • Perfect for Insurance and Car Leasing Applications

OBDII connectivity, easy to install 3G - GSM/GPRS/EDGE, WCDMA(UMTS/HSDPA) WCDMA850/900/1900/2100MHz, GSM 850/900/1800/1900MHz universal communication, Wide operating voltage range +6.0 ~+45VDC/1.5A Internal u-blox chipset Embedded full-featured protocol Internal 3-axis accelerometer for power saving and motion detection Internal antenna Internal GPS antennas, automatically use the one with better signal FCC/CE certified module.

OBDII Port Allow information to be read from OBDII port and provide device power. Support OBDII protocols SAE J1850 PWM,SAE J1850 VPW,ISO 9141-2,ISO 14230-4 KWP,ISO 15765-4 CAN ,SAE J1939 CAN. GSM Antenna Internal only GPS Antenna Internal only Indicator LED CEL and GPS RFID Keyless Identification 2.4 GHz RFID Technology Bluetooth BlueTooth® Smart 2.4 GHz Immobilizer(Optional) Disable the starter/ fuel Pump (speed configurable) Supports multi-wireless anti-Tamper relay installation Mini USB Port Mini USB port for upgrading Speed accuracy < 0.1M/S (wide-open area)

Advantages:

  • OBDII connectivity, easy to install.
  • Quad-band For WCDMA: 850/900/1900/2100MHz.
  • Quad-band For GSM: 850/900/1800/1900MHz
  • Wide operating voltage range +6.0 ~+45VDC/1.5A.
  • Internal u-blox chipset.
  • Embedded full featured protocol.
  • Internal 3-axis accelerometer for power saving and motion detection Internal antenna.
  • Internal GPS antennas, automatically use the one with better signal FCC/CE certified module.

GSM Specifications.

Frequency Quad-band For WCDMA: 850/900/1900/2100MHz
Quad-band For GSM: 850/900/1800/1900MHz
Max Out RF Power 23~25dBm
Min Out RF Power < -50dBm
Dynamic Input Range -25~-110dBm
Receiving Sensitivity BC0:-110dBm
BC1:-107dBm

General Specifications

Dimensions 55.0 x 51.5 x 28.5(mm)
Weight About 73g
Backup Battery Rechargeable 3.7V 200mAh Li-ion battery
Operating Voltage +6.0 ~+45VDC/1.5A
Operating Temperature and Humidity -200C ~ +800C (without battery)
-400C ~ +850C for storage (without battery)
0 ~ 95%
Data logger 8Mb for offline GPS waypoint

GPS Specifications

GPS Chipset 56-channel U-blox7 chipset All-ln-One GPS receiver 1575.42Mhz C/A
Sensitivity Autonomous: -147 dBm
Hot start: -156 dBm
Reacquisition: -160 dBm
Tracking: -162 dBm
Position Accuracy (CEP) Autonomous: <10m
(wide-open area)
SBAS: < 2.0m Auto 2D/3D
TTFF (Open Sky) Cold start: 40s average
Warm start: 2s average
Hot start: 1s average

Air Interface Protocol

Transmit Protocol TCP/IP, UDP, SMS, Bluetooth and RFID
Scheduled Timing Report Report position and status at preset intervals
OBDII Disconnection Alert An alert is sent to report of OBDII connection and disconnection status
Geo-fence Geo-fence alert and parking alert.
Low Power Alert Alert when backup battery is low
Power On Report Report when the device is powered on
Tow Alert Alert trigger based on built-in 3-axis accelerometer

Interfaces

OBDII Port Allow information to be read from OBDII port and provide device power. Support legislated OBDII protocolsSAE J1850 PWM,SAE J1850 VPW,ISO 9141-2,ISO 14230-4 KWP,ISO 15765-4 CAN ,SAE J1939 CAN.
GSM Antenna Internal only
GPS Antenna Internal only
Indicator LED CEL and GPS
RFID Keyless Identification 2.4 GHz RFID Technology
Bluetooth Bluetooth® Smart 2.4 GHz
Immobilizer(Optional) Disable the starter/ fuel Pump (speed configurable) Supports multi wireless anti-Tamper relay installation
Mini USB Port Mini USB port for upgrading
Speed accuracy <0.1M/S (wide-open area)
Download Brochure



DOWNLOAD MOBILE APPS